6 Reasons Your Trane Air Conditioner in Arvada Isn’t Heating and How to Fix Them

Have you noticed that your air conditioner works wonders to cool your home in summer, but when winter comes it can’t heat the space? Don’t worry, this problem is more common than you think and if your Trane Air Condition in Arvada doesn’t heat, it could be for several reasons. From technical problems to simple configuration errors, you will know why your air conditioner doesn’t heat properly in this post. You’ll discover everything you need to know to make sure your air conditioner works perfectly at any time of the year. So don’t let the cold weather catch you off guard. Keep reading!

Causes of Poor Heating by Your Air Conditioner

If your air conditioning equipment has been inactive for several months in its heating version, it can lead to possible incidents that cause failures in its smooth operation. The time has come to find answers. Before you get nervous about potentially replacing your home’s HVAC system, consider possible reasons below:

1.    Ensure the Device is Set to Heating Mode

Sometimes, rushing around can play tricks on us. Take a good look at your air conditioning remote control and check that you have switched from cooling to heating mode.

If after this adjustment you notice that the diffuser is almost closed and no air is being expelled, wait a few minutes. Please note that the unit must prepare to produce hot air. Therefore, a slight delay in the release of warm air is normal.

2.    Turn On the “Defrost” Mode for the Outdoor Unit

Another reason why the air conditioner does not heat, but does cool, is due to the formation of ice or frost on the outdoor unit. It happens when the temperature outside is low and the heating mode is activated.

The solution that specialists recommend is to activate the “Defrost” mode. This way can prevent these formations. However, its action is not immediate, and lasts about 15 minutes.

3.    Select the Temperature Carefully

As a general rule, the ideal temperature for air conditioning in winter is 21°C. However, the heating equipment does not work in heat mode because the temperature you have selected is lower than that of the room where the appliance is installed. Therefore, remember that you should always set the temperature to a level higher than the current temperature.

Likewise, it is important to keep in mind that when the outside temperature is very low and very cold, the sensation of heat provided by your air conditioning in heating mode is reduced.

4.    Unit with Insufficient Gas

What if the problem is insufficient gas in your air conditioning heat pump? In this case, you should go to the outdoor unit and check if the rear area where the outdoor exchanger is located is frozen or has frost.

In this case, it will be necessary for a specialized technician to check your equipment and perform a gas charge.

What if the problem is insufficient gas in your air conditioning heat pump? In this case, you should go to the outdoor unit and check if the rear area where the outdoor exchanger is located is frozen or has frost.

If so, it will be necessary for a specialized technician to check your equipment and perform a gas charge. Also, if you are facing ongoing issues or need an upgrade, you may also be recommended by the technician to get Trane Furnace Installation Service so your system operates efficiently.

5.    Neglected Filter Cleaning

In a previous post we already gave you the keys to clean the air conditioning filters. Review the procedure because this neglect may be one of the reasons why your air conditioning does not heat properly.

Hot air will exit the unit, but dirt adhering to the filters will act as a barrier preventing the air flow from being ideal for heating an entire room.

In addition, this situation will result in an increase in the gas pressure in the outdoor unit and, ultimately, excessive electrical consumption by the machine.

Moreover, if either the heat exchanger or the fan is full of dirt, the unit will blow out warm air conditioning but with little intensity, making it difficult to heat the room.

6.    Compressor Malfunctions

If your air conditioning unit does not expel any hot air despite putting your hand close to it, we regret to inform you that it may be due to the compressor not working properly. In this case, it will be necessary for a professional to examine the equipment and solve the problem with the compressor.

Is Your Air Conditioner Still Not Producing Heat?

If your air conditioner doesn’t work in heating mode, stop feeling cold this winter. Request a free quote through Comfort Pros and you will receive a few quotes proposal for the maintenance and repair of your air conditioning. We also deal in furnace, water heater, and Heat Pump Maintenance and repair services. Feel free to contact us whenever you need our assistance!